Remove Wall in Homes with Detached Mother in Law Suites
Homes with detached mother in law suites – Removing a wall in a house can be either a simple or a complex project. For partitions that do not carry a floor above, roof beams or other supporting element, it’s just a matter of removing the wall bit by piece. Walls that carry and carry the weight of floors, roof beams or other design members can be removed, but the design must be added.
Homes with detached mother in law suites with determine the type of wall to be removed. There is no easy way to determine if a wall is carrying or not. It takes a trained eye, and in some cases, to remove some drywall to be safe. If your basement is unloaded, measure to where your wall is upstairs. If it sits on top of a beam, it is most likely a bearing wall. Closet walls are usually not load-bearing walls and can be removed.
Generally, if a wall runs parallel to roof beams, it is not a load bearing wall. If you have any doubts, do not remove the wall until you speak with a professional. Remove the plaster from the wall you plan to remove with a hammer and flat iron. To make cleaner homes with detached mother in law suites and edges, make the plaster with a knife. Remove screws and nails with either a drill or a hammer. Try to remove gypsum in large pieces. A tiger saw works well to cut out large patches of plaster. Be sure what is behind the wall. If there are power lines or watercourses, be very careful to avoid personal injury or damage.